Etched Karambit with ABS Sheath

$55.00 $40.00

This was a leftover piece from a custom project we had and the hole size is NOT 1" like most of our karambits. The hole size is for a 10.5 ring size, which is smaller than 1". It was made to fit over the ring finger and used in a forward grip.

(Pictures provided may not be the actual piece you receive. All items are similar but due to their handmade nature they may vary from the picture provided)


Overall Length:  4"

Blade Length:    1 1/2"

Blade Width      1 1/4"

Blade Thickness  1/8"

Blade Grind:     Double Flat Grind

Edge Grind:      Double Flat Grind

Blade steel:     1095 High Carbon Steel

Heat Treatment:  Hand forged, normalized, hardened, oil quenched, and triple tempered.

Blade Finish:    Etched. Our etching is very deep and will not wear away and fade like surface coatings. It also helps hide imperfections that comes with use.

Handle:          Blue/red braided cord that is then sealed with epoxy resin to keep it from ever unwrapping.

Sheath:          ABS sheath. Sheath holes are drilled for either 3/4" or 1" centers and can be used with avarious hardware (sold separately) or tied to gear using Zip-Ties or cord. Provided with a paracord neck cord and Zip-Ties.